Workrite Series VALUE Assembly Instructions for Tables with Manual de usuario descargar pdf (Pagina 9)

Workrite Ergonomics | 800.959.9675 www.workriteergo.com 9

Sonoma Series™ VALUE Workcenters - Assembly Instructions for Tables with Left Front Crank

For Base-Only version: Secure Table Base to Tabletop

Position the leg assembly on the face-down table top. Center the assembly on the table so that

neither of the side legs overlap the edge. Mark the rst two pilot holes to ensure that your table

will be positioned correctly as detailed below before drilling the remaining holes.

The front right mounting hole for the crank handle must be positioned precisely 4⅞" from the

absolute edge of the table as shown in the

diagram.

The front left mounting hole for Leg 1 must be

positioned precisely 10⅞" from the absolute

edge of the table as shown in the diagram if

you have a 30" base version, or 4⅞" from the

absolute edge of the table if you have a 24"

base version.

Be sure there is enough clearance in front of

the crank handle for crank rotation and hand

clearance.

Drill and insert screws for these two holes

rst, then use the other screw holes to mark

the location of the remaining 28 holes. Attach

the desk at all points, but do not tighten the

screws that attach the crank handle at

this time.

4⅞" from

table edge to

mounting hole

⅞" from table

edge to mounting

hole for 30" base

versions

⅞" from table

edge to mounting

hole for 24" base

versions

Tighten Crank Handle to Desk

Push Crank Handle Assembly as close to leg

as possible, ensuring clips on hex rod are ush

against leg and gear box.

While pushing on crank assembly, tighten Wood

Screws connecting bracket to desk.

Tighten Wood Screws connecting

handle to desk.

Gear

box

Clips must

be ush

against the

leg and the

gearbox.

1 2 3 4 5 6 7 8 9 10

Comentarios a estos manuales

Sin comentarios

Workrite Series VALUE Assembly Instructions for Tables with Manual de usuario Pagina 9

Comentarios a estos manuales

Relacionado con productos y manuales para Mueble Workrite Series VALUE Assembly Instructions for Tables with